United States $
France €
España €
Italia €
Deutschland €
Europe €
0 Items
USystems
USystems is the preferred supplier of server cabinets and frames (24U, 30U, 36U, 42U & 48U), including all compatible shelves, fans, fittings and accessories.
Eaton Williams and USystems have developed a water cooling system - ColdLogik that uses less power, creates less heat and can work with your current systems.
24U Cabinets/Frames
24U cabinets and frames, including all compatible shelves, fans, fittings and accessories. More »
30U Cabinets/Frames
30U cabinets and frames, including all compatible shelves, fans, fittings and accessories. More »
36U Cabinets/Frames
36U cabinets and frames, including all compatible shelves, fans, fittings and accessories More »
42U Cabinets/Frames
42U cabinets and frames, including all compatible shelves, fans, fittings and accessories. More »
48U Cabinets/Frames
48U cabinets and frames, including all compatible shelves, fans, fittings and accessories. More »
Including fixed and extendable plinths, cable management, document wallets, depth support rails, blanking panels, baying kits, cage nut fixings, jumper rings hanging brackets, power strips, mounting angles and bonding kits. More >
ColdLogik™ Cooling Systems
High Density Cooling Solutions from USystems
In conjunction with Eaton Williams, a leading global cooling specialist in high tech applications, USystems have developed a range of cooling solutions to meet the ever increasing heat demands placed upon data centres and offices in general.
Problem: Heat Issues with Data Centres - Modular Range of Solutions
Conventional cabinet design allows heat from the equipment to pass straight back into the room. |
ColdLogik CL20 - Fully Vented Front |
 |
ColdLogik CL20 - Rear Door Heat Exchanger |
|
|
Solution 1: The ColdLogik™ CL20 Rear Door Heat Exchanger
Hot air produced by the equipment is pulled across a coil housed within the rear door, during the process the temperature of the air is reduced back down to the ambient room temperature. Because the coil covers the whole of the rear door the pull is even and therefore "hot spots" don't occur. Furthermore balance is maintained within the room thus eliminating hot zones.
|
|
| A curtain of cold air is forced down the front face of the cabinet |  |
Utilising and redirecting cold air from a raised floor |  |
Solution 2: The ColdLogik™ CL50 Cooling Distribution Unit
 |
The CL150 CDU will supply up to six rear door heat exchangers with clean, cooled water at a constant flow rate within a sealed and pressurised circuit. Supply water can be set to a fixed temperature or to 'dew point tracking' to maximise available cooling without fear of condensation at the rack. For further details on the ColdLogik™ product range please contact our sales department, or download the ColdLogik™ Information Sheet below:
|
Hardware.com is neither a partner of nor an affiliate of Cisco Systems.
Copyright © Hardware.com 2012 - Order by Phone: 0800 0830 646 Hardware.com Limited is a Private Limited Company. Registration Number: 04197529
Logos remain the property of the corresponding company. All rights reserved.
Copyright © Hardware.com 2012 - Order by Phone: 0800 0830 646 Hardware.com Limited is a Private Limited Company. Registration Number: 04197529
Logos remain the property of the corresponding company. All rights reserved.
